International Journal of Advanced Engineering and Nano Technology (TM)
Exploring Innovation| ISSN:2347-6389(Online)| Reg. No.:15318/BPL/13| Published by BEIESP| Impact Factor:3.76
Author Guidelines
Publication Fee
Privacy Policy
Associated Journals
Frequently Asked Questions
Contact Us
Volume-3, Issue-5 August 20, 2016
Volume-3, Issue-5 August 20, 2016

 Download Abstract Book

S. No

Volume-3 Issue-5, August 2016, ISSN: 2347-6389 (Online)
Published By: Blue Eyes Intelligence Engineering & Sciences Publication Pvt. Ltd. 

Page No.



Md. Hussain Basha, N.O. Gopal

Paper Title:

Co-Doping TiO2 Nanoparticles with Phosphorus and Nitrogen- A way to Enhance the Visible Light Driven Charge Separation

Abstract: Codoping TiO2 with nonmetals is one of the strategies that is used to make these materials sensitive to visible light. In this work, we obtained phosphorus and nitrogen codoped TiO2 nanoparticles by sol-gel method using H3PO4, NH4OH and Ti (IV) isopropoxide as precursors. As prepared sample were calcined at different temperatures, and the obtained samples were characterized by using different techniques. XRD analysis reveals the retarded phase transition by increased thermal stability and decreased particle size due to codoping. UV-Vis absorption spectra of the co-doped samples show redshift in their absorption edge due to doping of nitrogen and phosphorus. From XPS measurements, it is clear that nitrogen enters into interstitial sites of titania and phosphorus exists in a pentavalent oxidation state by replacing part of lattice Ti4+ by the formation of Ti-O-P bonds. Low temperature (77K) EPR studies with in situ visible high irradiation (>400nm) on the samples heated at different temperatures exhibit signals due to N˙, NO and the radicals formed due to photo generated holes trapped at different sites in these samples. Effect of heating temperature on these EPR signals has been studied in detail. EPR data reveals the enhanced charge separation as evidenced by the increased whole signal intensity and this enhanced charge separation plays important role in the photo catalytic activity of these samples

Codoping TiO2, XRD, UV-Vis, N˙, NO, (77K) EPR, Ti-O-P bonds, H3PO4, NH4OH and Ti (IV), 


1.         J. Schneider, M. Matsuoka, M.  Takeuchi, J. Zhang, H. Yu, M. Anpo, D. W. Bahnemann, Chem. Rev.  114 (19) (2014) 9986.
2.         D. Flak, E. Coy, G. Nowaczyk, L. Yate, S.  Jurga, RSC Adv. 5 (2015) 85152.

3.         G. Wang, X. Xiao, W. Li, Z. Lin, Z.  Zhao, C. Chen, C. Wang, Y.  Li, X. Huang, L. Miao, C. Jiang, Y. Huang, X.  Duan, Nano Lett. 15 (2015) 4698.

4.         M. Miyauchi, H. Irie, M.  Liu,   X.  Qiu, H. Yu, K.   Sunada,   K.  Hashimoto, J. Phys. Chem. Lett.  7 (1) (2016) 84.

5.         H. Park, H. Kim, G. Moon, W.  Choi, Energy Environ. Sci. 9 (2016) 433.

6.         R.  Asahi, T.   Morikawa, H. Irie, T. Ohwaki, Chem. Rev.  114 (19) (2014) 9852.

7.         Z. He, W. Que, J. Chen, X. Yin, Y. He, J. Ren, ACS Appl. Mater. Interfaces. 4 (12) (2012) 6826.

8.         P. Kavitha, S. Morrow, C. Han, M. Pelaez, X. He, D. D. Dionysiou, H.M. Hwang, Environ. Sci. Technol. 47 (17) (2013) 9996.

9.         C. Sun, D. J. Searles, J. Phys. Chem. C. 117 (50) (2013) 26459.

10.      M. V. Dozzi, L. Artiglia,  G. Granozzi, B. Ohtani, E. Selli, J. Phys. Chem. C. 118 (44) (2014) 25589.
11.      J.  Zhao, L.  Zhang, W.  Xing, K. Lu, J. Phys. Chem. C.  119 (14) (2015) 7737.
12.      Y. Shao, C. Cao, S. Chen, M. He, J. Fang, J. Chen, X. Li, D. Li, Appl. Cataly. B: Environ. 179 (2015) 351.

13.      A.E. Giannakas, M. Antonopoulou, C. Daikopoulos, Y. Deligiannakis, I. Konstantinou, Appl. Cataly. B: Environ. 184 (2016) 54.

14.      N. O. Gopal, H.H. Lo, T.F. Ke, C.H. Lee, C.C. Chou, J.D. Wu, S.C.  Sheu, S.C. Ke, J.  Phys. Chem. C, 116 (2012) 16197.

15.      J. Niu, P. Lu, M. Kang, K. Deng, B. Yao, X. Yu, Q. Zhang, Appl. Surf. Sci. 319 (2014) 106.

16.      X. Yue, J. Yinshan, Li. Fangfei, X. Maosheng X. Bing, L. Yanjuan, Applied Surface Science.289 (2014) 315.

17.      R. Asahi, T. Morikawa, T. Ohwaki, K. Aoki, Y. Taga, Science 2001, 293, 269.

18.      C. Burda, Y. Lou, X. Chen, A.C.S. Samia, J. Stout, J. L. Gole, Nano Lett. 3 (2003)- 1049-1051.

19.      N.S. Chaudhari, S.S. Warule, S. A. Dhanmane, M.V. Kulkarni, M. Valant, B. B.Kale, Nanoscale 5 (2013) 9383-9390.

20.      Z. Zhang, Z. Luo, Z. Yang, S. Zhang, Y. Zhang, Y. Zhou, X. Wang, X. Fu, RSC Advances 3 (2013) 7215-7218.

21.      K. Yang, Y. Dai, B. Huang, J. Phys. Chem. C 111 (2007) 12086-12090.

22.      Y. Cong, J. Zhang, F. Chen, M. Anpo, J. Phys. Chem. C 111 (2007) 6976.

23.      R. Nakamura, T. Tanaka, Y. Nakato, J. Phys. Chem. B 108 (2004) 10617.

24.      J.L. Gole, J.D. Stout, C. Burda, Y. Lou, X. Chen, J. Phys. Chem. B 108 (2004) 1230.

25.      X. Chen, C. Burda, J. Phys. Chem. B 108 (2004) 15446.

26.      N.C. Saha, H.G. Tompkins, J. Appl. Phys. 72 (1992) 3072.

27.      Y. C. Hong, C. U. Bang, D.H. Shin, H.S. Uhm, Chem.Phy.Lett.413 (2005) 454-457. 

28.      X. Chen, Y. Lou, A.C.S. Samia, C. Burda, J.L. Gole, Adv. Funct. Mater. 15 (2005) 41.

29.      L. Lin, R.Y. Zheng, J.L. Xie, Y.X. Zhu, Y.C. Xie, Appl. Catal. B 76 (2007) 196.

30.      M. Sathish, B. Viswanathan, R.P. Viswanath, C.S. Gopinath, Chem. Mater. 17 (2005)- 6349.

31.      T. Ma, M. Akiyama, E. Abe, I. Imai, Nano Lett. 5 (2005) 2543.

32.      R.Y. Zheng, Y. Guo, C. Jin, J.L. Xie, Y.X. Zhu, Y.C. Xie, J. Mol. Catal. A 2010, 319, 46.

33.      R.Y. Zheng, L. Lin, J.L. Xie, Y.X. Zhu, Y.C. Xie, J. Phys. Chem. C 2008, 112, 15502.

34.      Y.Y. Lv, L.S. Yu, H.Y. Huang, H.L. Liu, Y.Y. Feng, J. Alloys Compd. 2009, 488, 314.

35.      S.C. Ke, T.C. Wang, M.S. Wong, N.O. Gopal, J. Phys. Chem. B 110 (2006) 11628-11634.

36.      C.P. Kumar, N.O. Gopal, T.C. Wang, M.S. Wong, S.C. Ke, J. Phys. Chem. B 110 (2006) 5223-5229.

37.      S. Livraghi, M.C. Paganini, E. Giamello, A. Selloni, C. Di Valentin, G. Pacchioni, Journal of the American Chemical Society 128 (2006) 15666–15671.

38.      A.E. Giannakas, E. Seristatidou, Y. Deligiannakis, I. Konstantinou, Applied Catalysis B: Environmental 132– 133  (2013) 460– 468.

39.      Y. Xie, X. Zhao, Y. Li, Q. Zhao, X. Zhou, Q. Yuan, Journal of Solid State Chemistry 181 (2008) 1936–1942.

40.      Y. Nakaoka, Y. Nosaka J. Photochem. Photobiol. A: Chem. 110 (1997) 299.




Kumari Kshama, Yudhvir Yadav, Yatendra Singh, Saurav Kumar, Neha

Paper Title:

Analysis of Reinforced Concrete Framed Building with & Without Shear Wall

Abstract:  Shear wall, in building construction, a rigid vertical diaphragm capable of transferring lateral forces from exterior walls, floors, and roofs to the ground foundation in a direction parallel to their planes. Examples are the reinforced-concrete wall or vertical truss. Lateral forces caused by wind, earthquake, and uneven settlement loads, in addition to the weight of structure and occupants; create powerful twisting (torsional) forces. These forces can literally tear (shear) a building apart. Reinforcing a frame by attaching or placing a rigid wall inside it maintains the shape of the frame and prevents rotation at the joints. Structural walls provide an efficient bracing system and offer great potential for lateral load resistance. The properties of these seismic shear walls dominate the response of the buildings, and therefore, it is important to evaluate the seismic response of the walls appropriately. Shear walls are especially important in high-rise buildings subject to lateral wind and seismic forces.  It is very necessary to determine effective, efficient and ideal location of shear wall. In this study, a G+10 story building in Zone III is presented with some preliminary investigation which is analyzed by changing various positions of shear wall with different shape like C-shape and L-shape shear wall for determining parameters like axial load and moments in columns and beams. This analysis is done by using standard package STADD-pro. The comparison of these models for different parameters like shear force, Bending moment, Displacement, Storey drift and lateral forces has been presented.

 Shear wall, construction, diaphragm, C-shape, L-shape, STADD-pro, a G+10, (torsional),


1.      Bureau of Indian Standard, IS–1893, Part 1 (2002), “Criteria for earthquake resistant design of structures.”
2.      Bureau of Indian Standard, IS-456 (2002), “Plain and Reinforced concretecode of Practice.”

3.      Bureau of Indian Standard IS: 13920:1993,”Seismic Detailing of RC Structure.”

4.      Rahangdale, H. and Satone, S. R.(2013), “Design And Analysis of Multi-storeyed Building With Effect of shear Wall”, International Journal of Engineering Research and Applications (IJERA), Volume 3, Issue 3, pp 223-232.

5.      Choudhary, N. and wadia, M. (2014), “Pushover Analysis of R.CFrame Building with shear Wall”, IOSR Journal of Mechanical and civil Engineering (IOSR-JMCE), Volume 11, Issue 2.

6.      Dugal, S.K (2010), “Earthquake Resistant Design Structures”. Oxford University Press YMCA library building, Jai Singh road, New Delhi.

7.      Patil, S.S., Konapure, C.G and Ghadge, S.A (2013),”Equivalent    Static Analysis of High-Rise Building with Different Lateral Load Resisting Systems”, International Jouranal of Engineering Research & Technology, Vol. 2 Issue 1, January-2013.

8.      C.K. Wang, Intermediate structures (McGraw Hills, 2004).

9.      Aggarwal and Shrikhande, Earthquake resistant design of structures,(PHI Learning Limited, 2006).




Yatendra Singh, Yudhvir Yadav, Kumari Kshama, Saurav Kumar, Neha

Paper Title:

Seismic Analysis of Braced Steel Frames

Abstract:  The study of braced steel frame response is widely studied in many branches of Structural engineering. Many researchers have been deeply studying these structures, over the years, mainly for their greater capacity of carrying external loads. Every Special moment resisting frames undergo lateral displacement because they are susceptible to large lateral loading. As a consequence, engineers have increasingly turned to braced steel frames as a economical means for earthquake resistant loads. The present study consist a Steel Moment Resisting Frame (SMRFs) with concentric bracing as per IS 800 -2007. K bracing, Inverted V bracing, X bracing and an unbraced steel frame is considered for comparative study. Dimensions of each type of steel frame are similar having G+ 9 storeys, 30 m height. Each floor is of 3m height having four no. of bays along length (12m) and width (12m). The analysis is done by using standard package STADD pro. The comparison of these models for different parameters like Shear force, Bending Moment, Displacement, Storey drift and Lateral Forces has been presented by adding different types of bracings. Performance of each frame is studied through Equivalent static analysis.

(SMRFs), STADD, (12m) and width (12m)., 800 -2007, Equivalent, Bending Moment, Displacement,


1.      Tremblay, R.; et al.: Performance of steel structures during the 1994 Northridge earthquake, Canadian Journal of Civil Engineering, 22, 2, Apr. 1995, pp  338-360.
2.      Khatib, I. and Mahin, S.: Dynamic inelastic behaviour of chevron braced steel frames, Fifth Canadian Conference on Earthquake Engineering, Balkema, Rotterdam, 1987, pp 211-220.

3.      AISC (American Institute of Steel Construction), Seismic Provisions for Structural Steel Buildings, Chicago, 1997.

4.      AISC (American institute of Steel Construction). (1999), load and resistance factor design specification for structural steel buildings, Chicago.

5.      Meher Prasad: “Response Spectrum”, Department of Civil Engineering, IIT Madras.

6.      David T. Finley, Ricky A. Cribbs: “Equivalent Static vs Response Spectrum – A comparision of two methods”.

7.      IS 1893 (Part 1): 2002, “Criteria for Earthquake Resistant Design of Structures”.

8.      Hassan, O.F., Goel, S.C.(1991): ”Modelling of bracing members and seismic behaviour of concentrically braced steel frames”.

9.      Tremblay, R., Timler, P., Bruneau, M.,and Filiatrault,A. (1995). “Performance of steel structures during 17 january,1994 Northridge earthquake.”

10.   AISC,Manual of Steel Construction,Allowable Stress Design,9th Edition, American Institute of Steel Construction, Chicago, USA,1989.






Yao-Wen Tsai, Van Duc Phan

Paper Title:

State Feedback Sliding Mode Control for an Active Magnetic Bearing System

Abstract:   This paper proposes the state feedback Sliding Mode Control (SMC) approach in order to control the nonlinear system. A nonlinear model of  two degrees of freedom (DOF) of an Active Magnetic Bearing(AMBs) obtained using Lagrange’s equation is introduced. The SMC approach by using linear matrix inequality (LMI) technique is proposed not only to out-perform the proportional integral differential (PID) control but also to show some advantages. Firstly, a robust stabilization problem for a class of nonlinear systems is considered. Secondly, the conservatism of PID approach is reduced, fast response and reject disturbance of the system is also enhanced in this study. Finally, the simulation result has been obtained and compared with the conventional PID control. Website.

 state feedback control, two DOF for AMB, sliding mode control.


1.      C. K. Chen, T. D. Chu,  “Nonlinear Modeling and Control of Active Magnetic Bearings for A Flywheel Energy Storage System,” IEEE International Conference on Intelligent Human-Machine Systems and Cybernetics, vol. 1, 2014, pp. 284-287.
2.      Y.-W. Tsai ,V.D. Phan, V.A. Duong, C.T. Nguyen, T. D. Chu, “Model Predictive Control Nonlinear System of Active Magnetic Bearings for a Flywheel Energy Storage System,” Lecture Notes in Electrical Engineering 371, 2015, pp. 541-551.

3.      G. Genta, Dynamics of Rotating Systems. New York: Springer, 2004, ch. 2, ch. 3.

4.      D. Kairous, R. Wamkeue, B. Belmadani, “Sliding Mode Control of DFIG based Varable Speed WECS with Flywheel Energy Storage,” ICEM., 2010, pp. 1-6.

5.      F.-J. Lin, S.-Y. Chen, M.-S. Huang, “Intelligent double integral sliding-mode control for five-degree-of-freedom active magnetic bearing system, IET Control Theory and Appl, vol. 5, 2011. pp1287-1303.
6.      S. K. Min,  “Sliding mode control with disturbance observer for an active magnetic bearing system,” Transactions of the Korean Institute of Electrical Engineers, vol. 53, 2004, pp. 408-414.

7.      P. V. S. Sobhan, G. V. N. Kumar, J. Amarnath , M. Subbarao,  “Stabilization of Active Magnetic Bearing System Using Single Neuron PID Controller,” ARPN Journal of Engineering and Applied Sciences. Vol. 9, 2014, pp. 1149-1155.

8.      P. V. S. Sobhan, G. V. N. Kumar, J. Amarnath , M. Subbarao, “Rotor levitation and Autocentering by Active Magnetic Bearings using Fuzzy logic Controller”. Journal of Theoretical and Applied Information Technology, vol. 32, 2011, pp. 123-127.

9.      L. Xie, M. Fu, C. E. de Souza, “
H control and quadratic stabilization of systems with parameter uncertainty via output feedback,”.  IEEE Trans. Automat. Contr., vol. 37, 1992, pp. 1253–1256.
10.   G. Yang, J.-M. Zhang, “PD Control Strategy Design and Simulation of Magnetic Bearing with Single Freedom of Degree,”. Advanced Materials Research, vol. 760-762, 2013, pp. 1207-1211.